From new construction cladding to emergency storm repairs, Forge Siding delivers field-tested Siding across Cleveland and the surrounding NC service area. Call today for a free on-site estimate.
What separates our Cleveland operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across NC. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Licensed, bonded, and carrying full general liability plus workers' compensation in NC — not because it's optional, but because those protections matter for homeowners who invite a crew onto their property. Ask for our certificate of insurance before signing anything; we provide it without hesitation.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Musty smell in exterior-adjacent rooms, soft drywall near windows, or paint bubbling on interior walls all point to moisture infiltration from outside. Don't wait.
Warped vinyl often means panels were installed too tight — no expansion room for thermal movement. Over time, buckling creates gap points where panels separate at the lock, letting wind and water in.
Exterior paint peeling within two to three years of a repaint is almost always a substrate or back-priming issue. We diagnose the cause before recommending a fix.
Panels that rattle in wind, move when pressed, or show corrosion staining around nailheads need a fastener audit. Corroded fasteners eventually fail completely, and a panel without fasteners is a panel waiting to blow off.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Every service below is performed by our own licensed crews — not passed off to a subcontractor network. We carry the tools, the product certifications, and the field experience for every scope we quote.
Installation quality determines how long your siding actually lasts. The product you choose matters, but the installation practice matters more: correct expansion gaps, back-primed field cuts, properly integrated housewrap, and flashing that doesn't cut corners at rough openings. Our Cleveland crews treat those details as non-negotiable, not optional.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in NC and understand what documentation a claim requires.
Fiber cement carries a 30-year material warranty when installed by a certified contractor — but only when the installation follows manufacturer specifications precisely. Our Cleveland crews hold Preferred Contractor status on major fiber cement lines, meaning the full material warranty stays intact for the homeowner.
Property managers and HOA boards working with us get a dedicated project point of contact, building-by-building scheduling, and standardized documentation — including permit records, warranty registrations, and post-project photo files — formatted for HOA board records and reserve fund reporting.
Siding doesn't end at the wall panels. Soffit, fascia, corner posts, J-channel, window and door trim, and all penetration accessories are part of the building envelope — and failing trim is one of the most common moisture entry points we encounter. Our Cleveland, NC crews handle the complete trim system as part of every installation, not as an optional add-on. Vinyl soffit and fascia wrap, HardieTrim boards, and aluminum-capped fascia are all in our scope.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Cleveland, NC homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
There are plenty of siding contractors in NC. Here's what separates the ones worth hiring from the ones who cost you twice — once for the job and once for fixing what they did wrong.
Our written estimates don't disappear after the handshake. They become the contract, and the final invoice reflects the estimate scope. If something changes, we issue a written change order before doing additional work.
We don't schedule jobs we can't start within a reasonable window. If our current backlog means a delay, we tell you upfront and give you realistic dates — not optimistic ones.
An unlicensed crew on your property creates liability exposure for you, not just for them. Our credentials are public record and we never hesitate to provide documentation.
Every completed project comes with a signed workmanship warranty document — not just a promise. It specifies what's covered, for how long, and the process for raising a concern. We also register all material warranties in your name at project completion.
We sweep for fasteners and nails every afternoon before leaving, protect landscaping and driveways with staging tarps, and haul debris off-site rather than leaving a roll-off on your driveway for weeks.
Every Forge Siding project in Cleveland, NC closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
No mysteries, no moving goalposts. The same documented process runs on every project we take in NC.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in NC, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
The lead installer contacts you each morning to confirm the day's scope and each afternoon to report what was completed. If the inspection uncovers unexpected substrate conditions, you hear about it same-day with a written change order before we touch anything additional.
The walkthrough isn't a formality. If anything isn't right, we note it and fix it before considering the project closed. Our reputation runs on completed projects, not signed contracts.
We back every Siding project in NC with a written workmanship warranty. The warranty period, covered defects, and resolution process are all spelled out before we start. No fine print that swallows the coverage.
📞 +1-844-782-0929 — Free Estimate TodayWe replaced siding on the whole house after hail damage. Forge Siding handled the insurance documentation — panel-by-panel photos, written damage report, the whole package. The adjuster approved full replacement scope on first review. Crew finished in six days, clean site every night, and the new fiber cement looks exactly like what we picked from the sample.
Emergency call on a Saturday night after wind blew off eight panels on the back wall. Someone actually answered. Crew was on site Sunday morning, boarded up the exposed section, and had permanent panels installed by Tuesday. I'd been skeptical of "24/7" claims from other contractors — this is what it actually looks like.
Pre-purchase inspection on a property we were considering saved us from a significant surprise. Forge Siding found sheathing moisture on two wall sections that the general home inspector had noted as "siding in acceptable condition." The seller ended up crediting the repair cost. That inspection paid for itself many times over.
Had a historic cedar profile on our 1920s home that needed matching for a repair section. Forge Siding sourced a custom-milled profile from a sample board, got it approved through the preservation office, and executed a repair that's completely indistinguishable from the original. Real expertise for an unusual requirement.
Vinyl siding on our 1970s ranch — they explained the expansion gap tolerances, why the installation they were replacing had buckled, and what they were doing differently. The finished product has gone through one full summer without a single moving panel.
The daily communication system — a morning text with the day's plan and an afternoon report of what was completed — kept me in the loop without requiring me to check in on them. They finished on schedule and the property was completely clean when they left for the last time.
Forge Siding provides residential and commercial Siding across the full Cleveland, NC service area from our local Cleveland dispatch base. We're familiar with local building codes, permit requirements, and contractor licensing standards across NC — no learning curve on your project, no out-of-area crew navigating unfamiliar conditions on their first day.
Currently active in: 27013 and surrounding areas
Reach our Cleveland dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 +1-844-782-0929 — Talk to a Specialist